- Home
- LP Courses
- Hands-on Lab
- Cisco VIRL Hands-on Labs
Curriculum
- 13 Sections
- 64 Lessons
- Lifetime
Expand all sectionsCollapse all sections
- Cisco VIRL Lab Introduction1
- Lab Environment Preparation5
- Appendix A: Using External Telnet SSH Clients1
- Appendix B: Node Naming and IP Addressing Scheme1
- Topology 1: VLAN, Trunking, STP and Ether-Channel9
- 5.1Overview, Network Topology and Requirements30 Minutes
- 5.2Putty Window Size, Session Timeout Configuration30 Minutes
- 5.3Configuring VLAN Trunking and VLAN Security30 Minutes
- 5.4Configuring VTP Server and Clients30 Minutes
- 5.5Configuring Ether-Channels60 Minutes
- 5.6Configuring Management IP and Enabling Telnet30 Minutes
- 5.7Configuring “portfast”10 Minutes
- 5.8Designating and Configuring “Root bridge”30 Minutes
- 5.9Validation and Testing, Enabling “CDP”30 Minutes
- Topology 2: Configuring EIGRP IPv4 and IPv66
- Topology 3: Configuring OSPF IPv4 and IPv65
- Topology 4: Configuring IOS NAT/PAT5
- Topology 5: Configuring ASA With Multiple DMZ Networks (Security)6
- 9.1Overview, Network Topology and Requirements30 Minutes
- 9.2Cisco ASA Initial Configuration and Security Levels30 Minutes
- 9.3Setting Security Levels, Basic NAT for Internet Access30 Minutes
- 9.4Configuring Static NAT for Inbound Access to Web Server30 Minutes
- 9.5Enforcing Inter-security Segment Access Control30 Minutes
- 9.6Troubleshooting Tips and Tricks60 Minutes
- Topology 6: Configuring L2TP Over IPSec VPN on Cisco ASA (Security)7
- 10.1Overview, Network Topology and Requirements30 Minutes
- 10.2Initial Configuration and Basic Network Connectivity30 Minutes
- 10.3Configuring DHCP Pool for VPN Users30 Minutes
- 10.4Configuring Group-policy and Tunnel-group30 Minutes
- 10.5Implementing “split tunneling”30 Minutes
- 10.6Configuring VPN User Authentication30 Minutes
- 10.7Troubleshooting Common Issues30 Minutes
- Topology 7: Configuring Automatic ISP Failover (WAN, BGP)5
- 11.1Overview, Network Topology and Requirements30 Minutes
- 11.2Establishing eBGP peering with Upstream ISPs30 Minutes
- 11.3Configuring HSRP on R1 and R2 for HA Internet Gateways30 Minutes
- 11.4Configuring R2 to withdraw BGP announcement unless R1 Fails30 Minutes
- 11.5Validation and troubleshooting Tips30 Minutes
- Topology 8: Configuring DMVPN With IPSec and EIGRP Overlay7
- 12.1Overview, Network Topology and Requirements30 Minutes
- 12.2Configuring DMVPN Hub Router and NHRP Server30 Minutes
- 12.3Configuring DMVPN Spoke Routers30 Minutes
- 12.4Verifying DMVPN Functionality30 Minutes
- 12.5Enabling DMVPN Phase 3, EIGRP and Adjust MTU30 Minutes
- 12.6DMVPN Tunnel Verifications30 Minutes
- 12.7Encrypting Tunnel Traffic with IPSec30 Minutes
- Topology 9: Configuring MPLS VPN, VRF, OSPF and BGP6
- 13.1Overview, Network Topology and Requirements30 Minutes
- 13.2Configuring OSPF and MPLS on Provider Backbone30 Minutes
- 13.3Creating and Assigning Unique VRF to Customers30 Minutes
- 13.4Configuring MP-BGP and Route Reflectors30 Minutes
- 13.5Enabling OSPF Routing between PE and CE Routers30 Minutes
- 13.6Enabling Route Redistribution and Final Validation30 Minutes